Creating a sub ms delay before acquisition
Hello, I am currently working with the NI PXIe 6363 DAQ placed inside a PXIe-1073 chassis. I am controlling my DAQ using the DAQmx C API. I want to initiate a precise delay on the sub millisecond scale...
View ArticleClik here to view.
Peak Detection Issue
CNiPeakDetector:etectPeaks (Measurement Studio 2009 for VS2008) does not detect peaks anymore whereas CNiPeakDetector:etectPeaks of Measurement Studio 6.0 didn’t have any problems for the same data to...
View ArticleNIVISIO8.H from old installation seems not to work in new installation
Hello I'm software developer in Germany and have an old project, created by somebody else in 2009.Our software uses a vision system. The camera is driven by our software, using commands...
View ArticleSometimes NI VISA can't find USB-TMC device.
Hi,I connect several USB Test and Measurement Devices to my PC and turn on these USB Test and Measurement Devices devices, then there is a case to not find some devices. I use NI-VISA 18.0 on windows...
View ArticleUSB 6008 programming in C#
Okay, this seems to be the right place... kinda empty in here though.So, I'm making a hardware test fixture using a 6008 and a 6501 module. I seem to have the digital I/O working on the 6008, and the...
View ArticleDMM & Synchronization
Hello everyone,,When attempting to synchronize a 4071 DMM and a 6255 DAQ, The DMM seems to have inconsistant start delay. I have several bits of code that turn on and off voltages and I am attempting...
View ArticleInstalling DAQmx and c# code examples
HiI'm a bit rusty with all this, but it seems harder than it ought to be to install the DAQmx driver and write a C# program in Visual Studio 2013. (I just want a plain C# app, not measurement studio,...
View ArticleClik here to view.
Error to use Dispose API of NI-VISA in C++
Hi,I installed NI-VISA v18.00. and tried to create power supply control program in C++.Refer to example code from NI-VISA "Examples\.NET\17.5\SimpleReadWrite"I could send USB command to control...
View ArticleShould I use NI Measurement Studio or niDAQms for my VB.NET windows GUI app?
I need to create a VB.NET GUI to manage a National Instruments (NI) USB-6343 instrument. Should I use the NI Measurement Studio or niDAQms API? My GUI requirements are: - command the 6343 to input...
View ArticleNI PCIe-1433 Camera Link frame grabber programming using VC++!
Hello, I have a Basler Camera Link-compatible camera and they use the NI PCIe-1433 Camera Link frame grabber as the image acquisition device.Right now, I want to develop some applications on that...
View ArticleViSession contents
Hello, Does anyone know what types of variables/functions/parameters are contained by a ViSession object?Also, does a declaration ViSession m_InstrSession; initialize all of them properly?I am trying...
View ArticleWhere can I download NI-IVI 1.61?
Hi, I was trying to install NI-Scope 2.0, but before I can install this software there is a prerequisite software that I need to install first, NI-IVI 1.61 or later. Thank you.
View ArticleImplementing VISA protocol in STM32F7 module
Hi everyone, I'm trying implementing VISA protocol into my STM32 module to communicate it with LabVIEW. Any ideas? I´m stuck. Please help.
View ArticleVisual Studio 2010 hanging due to Measurment studio error.
Visual Studio 2010 just started hanging badly when I open a project. It was working fine until recently. I am working in Windows 7 and getting the following error from the windows event logs. Error...
View ArticleDAQmxReadBinaryI16
DAQmxReadBinaryI16 doesn't works as I expected. Am I wrong in understand that "sampsPerChanRead" had to be updated after each sample ? I'm using USB6211 and some example in ANSI C code. Everything...
View ArticleNutraKick Testo Booster *https://awaretalks.com/nutrakick-testo-booster/*
https://awaretalks.com/nutrakick-testo-booster/https://www.facebook.com/NutraKick-Testo-Booster-2904134873174532/https://medium.com/@vohah/2019-updated-nutrakick-testo-booster-2e025ca4dba4https://www.i...
View ArticleMigrating NI MS VS6 to latest [obsolescence management]
One of my clients wants to update his existing MXI system based on Windows 7 to Windows 10 with new computer hardware.The system is PXI connected over Fiber with MXI PCI card on a 3rd gen Intel Xeon...
View ArticleMAX - Panel Configuration n'affiche rien
Bonjour,J'ai un problème avec le logiciel Measurement and Automation Explorer. Lorsque j'ouvre l'application, rien ne s'affiche dans le panel de gauche 'Configuration', là où je devrais trouver les...
View ArticleClik here to view.
NI8452 32/64 bit DLLs
Hi all, I do have a question regarding the 32/64 bit version of the DLLs for the NI8452. I used the tipp from the this page: Using the USB-845-x API Functions My programming environment is Visual...
View Article